Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Centennial Homeowners
An electric gate that won’t open leaves you parking on the street, wrestling a heavy arm by hand, or buzzing a neighbor for help. We work exclusively on gates, and electric and automated repair is the core of what we do, not something we tack on between other jobs. Craig Estrada leads Gate Repair Centennial, and we’ve been working on gate systems since 2014. Whether your operator is a LiftMaster, a FAAC, or an older Mighty Mule that’s finally acting up, we diagnose the whole system and tell you straight whether it needs a repair or a replacement. Same-day service is often possible in Centennial. Call (866) 361-9624 and we’ll get you on the schedule. We answer 24/7.
Gate Opener Repair
Gate Opener Repair is the work of diagnosing and fixing the unit that actually drives your gate – the motor, the control board, the limit switches, and the arm or chain that moves the leaf. You need it when the gate stops partway, reverses for no reason, hums but doesn’t move, or only responds to the remote from a few feet away. We test the operator against the gate itself so we’re fixing the real fault, not guessing at the first suspect. Most opener repairs in Centennial run roughly $180 to $420 depending on the operator and the part involved, and the written estimate sets the final price before we start. We can work with your insurer on damage claims when that applies.
What a Failed Operator Looks Like
A dying operator rarely fails all at once. You’ll notice slower travel, a clunk at the end of the cycle, or a remote that needs a second or third press. Catching those early usually keeps the repair small.
Control Board and Limit Switch Fixes
The control board is the brain of the operator and the limit switches tell it where the gate should stop. When either one drifts, the gate can over-travel, stop short, or reverse mid-cycle. We test both before recommending a replacement part.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the broader system: the operator plus the safety devices, sensors, and wiring that let a gate run on its own without a person watching it. You need it when the gate opens on its own, refuses to close, reverses when nothing is in the way, or when a photo-eye or loop detector stops responding. We handle both swing and slide automatic gates, residential and commercial, and we test the safety circuit as carefully as the motor. Typical automatic gate repairs in Centennial fall in the $200 to $550 range depending on what’s failed and how much wiring is involved. The price is quoted and agreed before any work starts.
Safety Sensors and Photo-Eyes
A gate that reverses without reason is usually a safety sensor seeing something that isn’t there – a misaligned beam, a dirty lens, or a cut wire. We align, clean, and test the full safety loop. If a sensor has failed outright, we’ll tell you before we swap it.
Slide and Swing Gate Faults
Slide gates track on a rail and can bind, jump the track, or drag on the ground, while swing gates deal with hinge wear and arm alignment. Each type fails differently, and we diagnose the mechanical side alongside the automatic side.
Electric Gate Motor
The Electric Gate Motor is the drive unit itself, and when it’s the problem you’ll usually hear it before you see it: grinding, whining, or a motor that gets hot and quits. You need motor work when the gate moves sluggishly, the motor runs but the gate doesn’t, or the unit trips a breaker or overheats. We test the motor under load, check the gears and the drive mechanism, and separate a motor fault from a power or control problem so you’re not paying for a motor you didn’t need. Motor repairs and replacements in Centennial typically run $250 to $700 depending on the operator and whether we’re replacing the motor alone or the whole unit. We’ll give you the written price first.
Motor Diagnostics Under Load
A motor that works fine with no weight on it can still fail the moment it meets a real gate. We test under load because that’s where the truth shows up. That one step saves a lot of unnecessary part swaps.
Gear and Drive Wear
Gears, sprockets, and drive arms wear with age and use. When the wear gets bad enough, the motor runs but the gate barely moves. We check the drive train before assuming the motor is at fault.
Gate Access Control
Gate Access Control is everything that decides who gets through: keypads, remotes, card readers, intercoms, telephone entry systems, and the receivers and boards that tie them together. You need help when a keypad stops accepting codes, a remote stops working, a new tenant can’t be added, or an entry system locks out the people who should have access. We work with DoorKing and Linear entry equipment as well as the access accessories that pair with other operators. Access control repairs in Centennial usually run around $150 to $450 depending on the system and whether we’re reprogramming or replacing hardware. We give you a written estimate before any work begins.
Keypads, Remotes, and Receivers
Code and remote problems are often a pairing or receiver issue rather than a dead keypad. We test the receiver and the entry device together. Reprogramming is often the whole fix.
Entry Systems and Intercoms
Telephone entry and intercom systems on a gated entry have their own wiring and their own failure points. We trace the line, test the call path, and sort out whether the fault is in the unit, the wiring, or the phone connection.
Commercial Gate Operator
A Commercial Gate Operator has to handle more cycles, heavier leaves, and higher traffic than a residential unit, so it wears differently and it fails differently. You need commercial operator work when a gate at a business, HOA, or multi-unit entry starts hesitating, when the cycle count is high enough that parts are due, or when access for dozens of users has to keep working. We service commercial swing and slide operators under the same service model we use for homes. Commercial repairs in Centennial typically run $300 to $900 depending on the operator class and the parts involved, and the written estimate sets the final price. For scheduled work we book it after we’ve looked at the operator.
High-Cycle Wear Points
Commercial operators run far more cycles than a driveway gate, so gears, bearings, and drive components wear faster. We look at the wear points first because that’s usually where a commercial gate starts to fail.
Multi-User Access Needs
An HOA or a business entry usually has to serve a whole group of users, not one household. We sort out access programming so the right people get in and the system stays manageable.
Brands We Service
We work on gates and only gates, which means we’ve spent our time learning how each operator brand behaves under real use. On LiftMaster operators, we know the control boards, the limits, and the battery-backup side well because they’re common on residential driveways. FAAC equipment shows up on heavier swing and slide gates, and we know its hydraulic and electromechanical operators. Mighty Mule units are a frequent DIY-installed operator, and we know where those installs tend to come up short. Elite and DoorKing both show up on access-controlled entries, and we’re comfortable in their entry and operator lines.
None of that means we stop at five names. We service equipment from nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’re independent and experienced with each of them, never tied to one manufacturer, so the recommendation you get is about your gate and not about what we’re pushed to sell. Whether you have FAAC, Mighty Mule, or any other make, we can help, and we’ll never tell you your brand is unsupported. From a bent hinge to a failed motor board, we diagnose and repair it. Repair or replace, we’ll tell you which one actually makes sense.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses or stops mid-travel. Intermittent reversing is often a safety sensor or a limit switch drifting out of adjustment. It’s also the sign that something may be failing, so it’s worth a look before the gate quits entirely.
- The operator hums but the gate doesn’t move. A humming motor with a still gate points to a drive or gear fault, or a motor that’s seized. Running it further can burn out a motor that might otherwise be repairable.
- The gate won’t respond to the remote or keypad. Sometimes it’s a dead battery, sometimes it’s the receiver, and sometimes it’s the control board. Testing the whole chain tells you which.
- The gate drags, scrapes, or jumps the track. On a slide gate this usually means track or roller wear, and it puts strain on the operator with every cycle. Left alone, a mechanical fault can take the motor with it.
- The motor gets hot, trips a breaker, or smells like it’s burning. Heat and electrical smell mean stop using the gate and have it checked. Wiring and power faults on an operator are a job for a trained technician, not a DIY fix.
Our Process, Step by Step
- 1
You call and describe the problem. We ask what the gate is doing – not opening, reversing, dragging, dead keypad – and get the operator make if you know it. That helps us arrive ready.
- 2
We come out and diagnose the whole system. We test the operator, the motor under load, the safety devices, and the mechanical side of the gate together. We use a meter to trace power and control signals so we’re not guessing at parts.
- 3
We give you a written estimate before any work starts. The price you agree on is the price, and the estimate is free. If the honest answer is that a repair doesn’t make sense, we’ll say so and talk through replacement.
- 4
We do the repair or schedule the install. Most repairs we can complete on the spot. If a part has to be ordered or the job is a full replacement, we measure, order, and schedule it properly.
- 5
We test the gate with you and walk you through it. Every safety device gets tested, the travel gets set, and you leave knowing how your gate should sound and behave. If anything’s off, you know what to watch for.
How Much Does Electric Gate Repair Cost in Centennial?
Most electric gate repairs in Centennial fall somewhere in the $150 to $900 range, and the scenario drives the number more than the brand does. A gate opener repair, like a limit switch or control board, typically runs $180 to $420. Automatic gate work involving safety sensors or wiring lands around $200 to $550. An electric gate motor repair or replacement runs $250 to $700 depending on whether we’re swapping the motor alone or the whole operator. Access control repairs, keypads and entry systems, usually sit between $150 and $450. Commercial operators, which handle heavier leaves and higher cycles, typically run $300 to $900.
What affects the price: the operator class, whether the fault is mechanical or electronic, whether wiring has to be run or traced, and how accessible the operator is. A simple sensor alignment costs far less than a motor replacement. To avoid overpaying, don’t let a small problem run – a dragging gate that strains the motor can turn a track fix into an operator replacement. Ask for the diagnosis in plain terms and ask which parts are actually being replaced.
Every estimate from us is free, and the written estimate sets the final price. You’ll know the cost before a single tool comes out. Call (866) 361-9624 for an exact quote – estimates are free.
Our Service Area Near Centennial
We serve Centennial and the surrounding south Denver metro. From Centennial we regularly reach Highlands Ranch, Aurora, and Denver, and we cover Lakewood, Westminster, Arvada, Thornton, Brighton, and Broomfield as well. We also handle electric gate repair and electric gate repair in those neighboring areas, and same-day service is often possible for repair calls. For scheduled work we book it after we’ve seen the gate.
Serving Centennial, CO – Our Local Coverage Area
We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Centennial
Electric gate repair is fixing the powered system that opens and closes a gate – the operator, motor, control board, safety devices, and access controls – along with the mechanical gate structure they drive. It covers diagnosis and repair of both the electronic side and the physical gate itself. If a gate is automated, the repair almost always touches both, which is why we test them together.
Many electric gate repairs are done the same day, and most simple fixes take about an hour to two hours on site. Complex jobs, like a motor replacement or wiring that has to be run, may take longer or need a follow-up visit once a part is ordered. We’ll give you a realistic timeframe after we’ve diagnosed it.
Typical electric gate repairs in Centennial run about $150 to $900 depending on the fault, the operator type, and whether parts are involved. Opener repairs usually land in the $180 to $420 range, while commercial operator work runs higher. The written estimate sets the final price before we start, and estimates are free.
Yes, we service LiftMaster operators and know where they wear. We also service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Whether your operator is LiftMaster, FAAC, or anything in between, we can diagnose it.
Same-day service is often possible for electric gate repair in Centennial, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call and we’ll get you on the schedule for the next opening. We answer 24/7, so a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind our work and will talk through warranty specifics on your repair when we give you the written estimate. Ask us directly and we’ll tell you exactly what’s covered before any work starts. You’ll never be surprised by what’s included.
Clear access to the operator and the gate’s path so our technician can test the full travel, and make sure the gate area is safe to work around. If you have the operator manual or know the model, have it handy, but it’s not required. If the gate is stuck open or stuck closed, let us know when you call so we can arrive prepared.
Schedule Your Electric Gate Repair Service in Centennial Today
If your gate has stopped mid-cycle, won’t close, or the operator has gone quiet, we can help. We work exclusively on gates, which means your electric gate gets a specialist, not a generalist. Call (866) 361-9624 for a no-obligation free estimate and written pricing before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Serving Centennial since 2014.
Written by Craig Estrada, Owner at Gate Repair Centennial, serving Centennial since 2014.