Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lakewood
A gate that won’t close right is a daily problem in Lakewood. Shared driveways get blocked, cars sit out in the open, and a dumpster enclosure left open becomes everyone’s mess. We work exclusively on gates, so when a swing gate sags or an operator stops mid-travel, we already know where to look. That focus matters in a city where so many gates serve more than one household and need to keep working while we’re on them.
We’re Gate Repair Centennial, and our gate repair team handles manual and electric systems across Lakewood and the surrounding Front Range. Fast dispatch runs 7am to 7pm, Sunday through Friday. Call (866) 361-9624.
Why Lakewood Homeowners Call Gate Repair Centennial for Gate Repair
Lakewood gate work is its own animal. The city’s housing runs from post-war brick ranches to large 1970s and 1980s townhome and condo clusters, and a single route can put you at a decorative iron pedestrian gate on an older lot in the morning and a shared aluminum driveway gate owned by six households in the afternoon. That second kind takes coordination as much as repair. Somebody has to agree to the work, the gate has to stay usable while it’s off, and the fix has to hold for everyone.
We’re independent, led by Craig Estrada, and we’ve worked on gates since 2014. No garage doors, no fencing, no general contracting. That single focus is why property managers and HOAs around Lakewood call us first when an operator faults out or a slide gate starts jumping its rack. Whether the operator is LiftMaster, FAAC, Elite, or Mighty Mule, we diagnose the mechanical side and the electronics together, because one usually causes the other.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Repair in Lakewood
Commercial gate repair in Lakewood covers the automated entrance and utility gates behind apartment complexes, retail lots, and the dense townhome clusters off West Alameda Avenue and along the 6th Avenue corridor. That’s where most of this work happens. A commercial gate here is usually a slide gate or a heavy swing gate with loop detectors, a keypad or card reader, and safety photocells, and when any one of those fails the whole access point goes down. Repairs typically run $275 to $650 depending on whether the problem sits in the operator, the access control, or the gate structure itself. The written estimate sets the final price, and we give it before any work starts.
Loop Detectors and Access Control
A gate that opens on its own, refuses to open for a car, or slams shut before the vehicle clears is usually a loop or photo-eye problem, not a motor problem. We test the loops, the readers, and the safety edges as a system. You get a straight answer on which component failed rather than a guess.
Shared Driveway and Enclosure Gates
These serve multiple owners, and they have to keep functioning for everyone while we’re on site. We plan the work around peak traffic and keep the gate usable wherever it’s safe to. When a repair needs sign-off from an HOA board, we explain the scope plainly so it can be approved.
Iron Gate Repair in Lakewood
Iron gate repair in Lakewood mostly lands on two types: the decorative steel and wrought-iron pedestrian gates on the east side’s mid-century lots, and the shared privacy-fence gates in the townhome complexes. Colorado’s dry air cracks and splits wood posts, and spring hail bends latches and dents decorative panels. A sagging iron gate usually points to a hinge or a post issue, and we check both before touching the latch. Hinge and latch work typically runs $150 to $400, while post re-anchoring or a full re-set pushes into the $400 to $900 range. Free estimates, and the price is agreed before we start.
Hinge, Post and Weld Work
Loose hinges on a cracked post are a post problem wearing a hinge costume. We re-set and anchor posts, weld broken joints, and treat rust before it eats a gate’s structure. Welding is done with proper surface prep so the repair lasts through another hail season.
Re-Alignment and Sag Correction
A gate that drags, catches, or won’t latch is out of alignment somewhere, and the cause is often a footing that moved rather than a hinge that slipped. We trace the sag to its source before tightening anything, because a quick tighten on a heaved post just delays the same call.
Trusted Brands We Service in Lakewood
We work on the operators that actually show up in Lakewood driveways and commercial lots, including LiftMaster, FAAC, Elite, and Mighty Mule, plus Linear, BFT, Viking, Ghost Controls, and DoorKing. Brand doesn’t decide whether we can help. We keep parts on hand for the common operators we see around Lakewood, so a motor board, a safety edge, or a rack and pinion doesn’t mean a two-week wait. Same-day repair is often possible, and when a part needs to be ordered we tell you the timeline up front.
Common Gate Repair Problems We See in Lakewood Homes
- Heaved hinge posts from shallow original footings. A lot of Lakewood’s post-war lots still have the original posts in the ground, and decades of freeze-thaw have pushed them up. A gate that looks like a latch adjustment is frequently a post-anchoring job.
- Hail damage on iron and aluminum gates. Spring hail in Lakewood bends latches, cracks hardware, and dents decorative panels on both iron pedestrian gates and shared aluminum driveway gates. Latch and hinge failures follow.
- Cracked wood posts and loose hinges. The dry Front Range air cracks wood posts, and combined with freeze-thaw it turns a simple sag correction into a post replacement. Privacy-fence gates take the worst of it.
- Misaligned slide gates on shared driveways. A slide gate that jumps its rack and pinion or reverses on its own is usually running on a track thrown off by a moved post, not a motor that died.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Lakewood, CO
Exact pricing on a Lakewood gate comes after we’ve seen it, but the ranges are real and worth knowing. Hinge and latch work typically runs $150 to $400. Iron gate post re-anchoring and weld repair sit around $400 to $900. Electric gate operator diagnosis and repair usually lands between $250 and $700, and commercial gate repair runs roughly $275 to $650. Shared driveway gates that serve several owners cost the same to fix; only the approval process differs. The estimate is free, and the price is quoted and agreed before any work starts, so there’s no surprise on the invoice. Call (866) 361-9624 for an exact quote.
We Also Serve Cities Near Lakewood
Lakewood sits right against several of the cities we cover. If your gate is in Arvada, Denver, Westminster, or Highlands Ranch, we dispatch to those areas on the same route, and the local conditions are close to what we see in Lakewood. The same post-anchoring and operator work applies across the metro.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakewood
Yes. We plan shared-driveway work around the traffic other owners depend on and keep the gate usable wherever it’s safe while we’re on site. A slide gate that won’t close is often a track or post-footing issue, so the fix may be a post re-set and realignment rather than a motor repair. Call (866) 361-9624 and we’ll schedule an on-site estimate.
Because the hinges usually aren’t the cause. On Lakewood’s older lots, the post footing is often the original shallow one, and freeze-thaw has heaved it, so the gate sags no matter how tight the hinges are. It needs post re-anchoring, not a tighten. Call (866) 361-9624 for a free estimate.
Yes. Loop detectors, card readers, keypads, and safety photocells are core to our commercial gate repair work in Lakewood. We test the access control and the gate structure together because a loop failure often presents as a gate that won’t open. Call (866) 361-9624 to book a site visit.
Heaved and sagging swing gates from shallow original post footings, closely followed by hail-season hinge and latch failures. The east side’s mid-century lots and the 1970s townhome clusters show this most. Call (866) 361-9624 and we’ll tell you which it is.
Yes. Repairing and testing safety edges and photocells is part of every automated gate call, and the gate should test clean before we leave. If you’re missing entrapment protection, we can add it. Call (866) 361-9624, estimates are free.
Call Gate Repair Centennial for Lakewood Gate Work
Whichever kind of gate you have, an iron pedestrian gate on a mid-century Lakewood lot or a shared aluminum slide gate in a townhome cluster, the fix starts with a real look at it. Call (866) 361-9624. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by Craig Estrada, Owner at Gate Repair Centennial, serving Lakewood since 2014.