Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Aurora
If your electric gate stopped mid-open, won’t close, or has been dragging for months, we can help. Gate Repair Centennial works exclusively on gates, and we cover Aurora from the newer southeast subdivisions to the older commercial core. We handle the motor, the operator, the access control, and the heavy gate itself. That matters here, because an Aurora gate faces things a Denver gate doesn’t: freeze-thaw that moves post footings, high-plains wind that stresses every hinge, and hail that dents ornamental frames. One call to (866) 361-9624 starts it. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Estimates are free, and the price is set per job by a written estimate before any work begins.
Why Aurora Homeowners Call Gate Repair Centennial for Electric Gate Repair
We’re a gate-only specialist, led by owner Craig Estrada. That’s not a marketing line; it shapes how we diagnose. When a heavy custom swing gate binds at the hinge, a generalist sees “gate broken” and quotes a new operator. We look at the footing, the hinge, the track, and the motor board as one system, because on a high-end Aurora property they fail as one system.
Aurora customers call us back because we tell them the truth about repair versus replace. Sometimes a DoorKing operator needs a control board; sometimes the operator is fine and the gate frame is out of alignment from a storm. We work on both halves of that problem. Whether your operator is LiftMaster, FAAC, Viking, or anything in between, we know it. We’re independent and experienced with every brand we service, and we never tell a customer their gate brand is unsupported.
Local knowledge earns its keep here. We understand why a whole block in a southeast Aurora subdivision fails together, and why the older core near Anschutz/Fitzsimons produces steady commercial security gate work. Those are different jobs with different answers. We serve Aurora and treat each of those two markets on its own terms.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in Aurora
A Commercial Gate Operator in Aurora covers a different job than a driveway gate on a single lot. Around the Anschutz/Fitzsimons medical campus and the denser multi-family blocks in 80011, operators run all day on apartment complexes, parking entries, and shared perimeter security gates. That duty cycle is brutal, and a commercial operator that’s been cycling hundreds of times a day shows wear fast. Full commercial operator repair in Aurora typically runs $400 to $1,200, with motor and control board work at the higher end. The written estimate sets the final number, and an on-site estimate is free.
Duty-cycle wear on shared-access gates
Commercial operators on HOA-shared fences and apartment entries wear out bushings, gearboxes, and control boards faster than residential units. We check the cycle count symptoms first – sluggish return, overheating, and repeated fault trips – before recommending a part. A gate that stops at the same spot every time usually points to the board, not the motor.
Access control and intercom integration
Many Aurora commercial gates pair a DoorKing operator with keypads, card readers, and intercom entry. When one part of that chain fails, the gate can look dead when only the keypad is. We troubleshoot the whole access path so you’re not replacing an operator that was working fine.
Gate Opener Repair in Aurora
Gate Opener Repair in Aurora is the call we get most from homeowners, and for good reason. Builder-grade operators in the post-2000 southeast subdivisions – 80013, 80015, 80018 – are now hitting the 15 to 25 year mark, the age where motors seize, gearboxes strip, and boards burn out. When the opener binds instead of gliding, the motor strains and eventually gives up. Typical gate opener repair in Aurora runs $250 to $700, with full operator replacement higher depending on the gate and drive type. The written estimate fixes the price before we start, and the estimate itself is free.
Diagnosing the opener before replacing it
A dead opener isn’t always a dead motor. We test the power, the control board, the safety sensors, and the gate’s own travel resistance before quoting a replacement. If the gate is binding, a new opener will just fail the same way. Fixing the binding first is often the cheaper, longer-lasting answer.
Why original operators fail in clusters
In southeast Aurora, the builder installed the same operator models across whole blocks at the same time. They wear out on the same schedule. That’s why a gate failing on your street is often followed closely by three more – it’s not bad luck, it’s a shared install date catching up.
Trusted Brands We Service in Aurora
We work across nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Aurora’s high-end properties, that means we can match the right fix to a paired operator and access system without steering you toward a brand we prefer. We keep common parts on hand for Aurora customers so a straightforward repair doesn’t stall waiting on a special order. Whether your operator is Mighty Mule on a residential swing gate or DoorKing on a commercial entry, we diagnose it the same way and turn the repair around fast. Our electric gate repair team handles operators, motors, control boards, sensors, keypads, and remotes under one roof.
Common Electric Gate Repair Problems We See in Aurora Homes
- Frost heave shifting post footings. Aurora’s freeze-thaw cycles push footings up and out of line, which sags a gate and stresses the underground operator and hinges. It’s especially common in the southeast master-planned subdivisions, where gates sit on soil that moves every spring.
- Wind and hail damage to ornamental frames. High-plains wind bends latch points and knocks slide gates off their tracks; hail dents and warps lighter ornamental frames. Loop detectors and keypad entry on HOA-shared fences take a beating too.
- Builder-grade operators reaching end of life. LiftMaster and Linear units installed 15 to 25 years ago are seizing from lack of maintenance or burning out because the gate beneath them binds. These failures show up block by block.
- Access control failures on commercial gates. Near the Anschutz/Fitzsimons core, shared security gates lose keypads, readers, and intercoms faster than the operators themselves, so the gate looks dead when the entry system is the real fault.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Aurora, CO
You’ll want real numbers, not “it depends.” For Aurora, a typical opener repair runs $250 to $700. Commercial operator repair, including motor and control board work, runs $400 to $1,200. Keypad and access control repair usually lands $150 to $450, and safety sensor or photo-eye replacement runs $150 to $350. What pushes a job higher: a gate that’s binding from frost-heave footing damage, a rare control board, or a full operator replacement on a heavy custom gate. We give a free estimate, put the price in writing, and agree it with you before any work starts, so the invoice matches the quote. Heavy bespoke gates sometimes need a reset and realignment of the frame and track to run right again, and that’s priced after we’ve seen it, not guessed over the phone.
We Also Serve Cities Near Aurora
We cover Aurora and the surrounding metro, including Centennial, Denver, Highlands Ranch, and Thornton. If your gate sits just over a city line, that’s fine; the same gate-only approach applies. Call (866) 361-9624 and we’ll sort out the details for your address. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aurora
Because the builder installed the same operators across whole blocks at the same time, and those units are now 15 to 25 years old. They reach end of life together. That’s why gate failures in these southeast subdivisions show up in clusters on a street rather than as one-off calls. If your neighbor’s LiftMaster or Linear gate just died, yours is running on borrowed time too – call (866) 361-9624 for a free estimate so you’re not caught mid-open.
Freeze-thaw cycles move post footings, and when a footing shifts, the gate sags and the underground operator has to fight that misalignment every time it cycles. That extra strain wears hinges and burns out motors. It’s the most common reason an operator fails early in Aurora’s high-plains climate. We reset and realign before replacing parts, so the new operator isn’t set up to fail. Call (866) 361-9624 – estimates are free.
A shifted footing from frost heave is the usual cause, not a worn hinge. When the ground moves, the gate drops and binds, and the operator strains. On heavy custom gates, the sag can also pull the frame out of square. We correct the sag by resetting the post and adjusting the hinges, then realign the drive so it runs silently again. Call (866) 361-9624 for a free on-site estimate.
Check the control board, the safety sensors, and the gate’s physical alignment first – hail and wind often warp a frame or knock a photo-eye out of line rather than killing the motor. A dented frame can bind the gate and trip the operator’s safety stop. Don’t force it open; that can strip the gearbox. Call (866) 361-9624 and we’ll diagnose it. Estimates are free and the price is agreed before any work starts.
Yes. The older core around Anschutz/Fitzsimons generates steady commercial and multi-family security gate work, and we handle the door and access side as well as the operator. That includes DoorKing operators, keypads, card readers, and intercom entry on apartment and campus-adjacent properties. We troubleshoot the whole access chain, not just the motor. Call (866) 361-9624 for a free estimate on your commercial gate.
Talk to a Gate Specialist in Aurora
Whether it’s a custom ornamental swing gate that’s been dragging for months or a commercial security gate that won’t cycle, we can look at it and tell you what’s actually wrong. We work exclusively on gates, so the diagnosis and the fix come from the same place. Call (866) 361-9624 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday; if your gate fails then, call and we’ll book you for Sunday. The price is put in writing and agreed before any work starts.
Written by Craig Estrada, Owner at Gate Repair Centennial, serving Aurora since 2014.