Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Denver, CO
If you’re adding a gate to a Denver property, the job almost never starts on flat, fresh ground. It starts with a 1920s brick pier that has heaved an inch since last spring, a short front yard in Park Hill, or an alley-facing driveway that has to clear a trash truck’s swing arc. We work exclusively on gates – it’s the only thing we do – and Denver is where that focus pays off, because the city’s clay soils, freeze-thaw swings, and high-altitude sun make gate work here its own discipline. Call (866) 361-9624 for a free estimate.
Why Denver Homes Are Different
Denver’s gate problems come from three things happening at once: ground movement, weather, and the age of what the gate is bolted to.
Start with the soil. Denver’s expansive clay takes on water and lets it go, and the result is that posts and masonry piers heave and settle. A gate hung between brick piers in Congress Park or a side-yard security gate bolted to a stone pier on an old bungalow will start dragging or binding even when the hinges are fine. Re-setting and re-anchoring posts is a big share of the work we do in Denver.
Then there’s the climate. Roughly 30 to 40 freeze-thaw swings a year work on every fastener and every footing, and the dry air and intense UV at this altitude hammer wood. Boards cup, split, and lose paint fastest on south- and west-facing gates. The June-through-August hail and wind events bend lighter aluminum gates and knock operator hardware loose.
And Denver is an alley city. A lot of garages face the alley, so alley-facing driveway gates that must swing clear of front-load trash and recycling routes are a distinctly Denver repair and installation category. That reality shapes where we place hinges, how we set stops, and when a bollard makes sense.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Denver Services
Most Denver calls fall into two buckets: a gate that’s stopped working and needs repair, and an electric gate whose operator has failed. Here’s what each involves here.
Gate Repair in Denver
Denver gate repair usually means more than a hinge swap. On older brick and stone piers, sagging wrought-iron or rental-grade aluminum hardware, and gates that have been clipped by trucks in the alley, we diagnose the whole assembly – posts, mounting, hardware, swing, and latch – before we touch anything. Ground heave from clay soils shifts a post every spring, so a gate that worked last fall may now bind at the bottom or fail to latch. From a bent hinge to a failed motor board, diagnosed and repaired. You can read more about Gate Repair in Denver for the full scope.
Electric Gate Repair in Denver
Automated gates in Denver take a beating from hail, wind, and cold, and the operator is often the first thing to fail. Our technicians are fluent in motor and operator diagnostics, so a gate that stops mid-open or reverses for no reason gets a real diagnosis, not a guess. Whether your operator is LiftMaster, FAAC, Viking, or anything in between, we know it. Because we work on the mechanical gate structure and the electronics together, we can tell whether the fault is the operator, the hardware, or a post that has moved. See Electric Gate Repair in Denver for details.
Gate Installation in Denver
Installing a gate in Denver means planning around the building, not just the gate. In Park Hill, Congress Park, and the 80206/80207 blocks, that often means hanging a new drive or side-yard gate between masonry piers on an early-1900s brick or stone base – and those piers move. Out toward Montbello, the 1950s-to-70s brick ranches generally give us wood posts or red-iron steel frames to work with, while the newer infill around Lowry in 80230 offers cleaner footing. Wherever the gate goes, our approach to gate installation accounts for Denver’s clay, its freeze-thaw swings, and its alley traffic from the first measurement.
Automatic Gate Installation
An automatic gate is a system, not a panel, and Denver sites are where that shows. We size the operator to the gate’s weight and swing, wire it in, and set the safety edges so the gate stops for a person or a vehicle.
Signs you need it
The gate you have is manual and heavy enough that someone has to get out of the car to open it, or an older operator has been repaired to the point where it’s done.
What it costs in Denver
Most Denver automatic gate installations run about $2,800 to $7,500 depending on gate size, operator, and whether a power run is needed, and the written estimate sets the final price.
How we do it
We measure the opening and the mounting points, confirm the gate or build the frame, run and connect power, mount and program the operator, then set and test the safety edges and swing limits before we call it done.
Driveway Gate Installation
A driveway gate carries the most traffic and takes the most punishment. On a Denver alley driveway, that means setting the swing so it clears the front-load truck’s arc without a fight every week.
Signs you need it
Your driveway is open to the alley or street, or the existing gate has been hit, bent, or repaired one too many times to be reliable.
What it costs in Denver
Driveway gate installation typically falls in the $1,800 to $6,500 range, with width, material, masonry work, and automation as the main drivers, and the written estimate is the final number.
How we do it
We locate and set the posts to proper footing depth, build or hang the gate, mount the hardware and any operator, then check the swing against the trash and delivery routes before we adjust stops.
What Gate Installation Costs in Denver
Prices vary by width, material, and how much site work the existing piers or soil require. These are typical estimates, not a quote – the written estimate you get after we see the site is what you’ll pay.
| Item | Typical range in Denver |
|---|---|
| Basic manual driveway gate installation | $1,800 – $4,000 |
| Automatic gate installation with operator | $2,800 – $7,500 |
| Full new gate and operator, complex site | $4,500 – $9,000 |
Can you install a gate between existing brick piers in Denver?
Yes, and it’s common in older Denver neighborhoods. We inspect the piers first because clay-soil heave often moves them, then re-set or re-anchor as needed so the new gate hangs and swings cleanly. Call (866) 361-9624 for a free estimate.
How long does automatic gate installation take in Denver?
Plan on a scheduled project rather than a same-day job. Most automatic gate installations in Denver take one to three days on site once the gate and operator are ordered, and a power run or masonry repair adds time. We give you a written price up front.
Brands We Service in Denver
We’re independent and experienced with nine brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. Our vans carry common operator and hardware parts, and when a part needs ordering we tell you the timeline up front. See our brands for the full picture on what we support.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Denver, CO
Gates are priced per job by a written estimate, and the price is agreed before any work starts, so there’s no surprise invoice later. General repair visits typically run from around $150 to $600, while electric operator repair and diagnostics range roughly $200 to $900, and full installation projects sit from about $1,800 up to $9,000 depending on size and site. What pushes price up in Denver is site condition: heaving clay that needs posts re-set, masonry repair on old piers, a new power run out to a detached alley garage, and access limits in tight front yards. We quote it all in writing up front.
| Service | Typical range in Denver |
|---|---|
| Gate repair, general hardware and adjustment | $150 – $600 |
| Electric gate operator repair | $200 – $900 |
| Manual driveway gate installation | $1,800 – $4,000 |
| Automatic gate installation with operator | $2,800 – $7,500 |
| Full new gate and operator, complex site | $4,500 – $9,000 |
Neighborhoods We Serve in Denver
We work across the city and route technicians accordingly, so a call from one side of Denver gets a fast dispatch from 7am to 7pm, Sunday through Friday, with the phone answered 24/7. Park Hill and Congress Park gates sit on old masonry piers; Montbello and 80239 properties run to post-war brick ranches; Lowry in 80230 is newer infill. Expect your area to be covered on the usual dispatch schedule, and call for a free estimate.
- Park Hill
- Congress Park
- Montbello (80239)
- Lowry (80230)
Service Area – Cities Near Denver
Denver sits in the middle of the metro we cover, and we handle gates in the surrounding cities with the same gate-only approach. If you’re just outside the city line in Westminster, CO or Thornton, CO, we cover those too. Same for Lakewood, CO and Arvada, CO. Call (866) 361-9624 to confirm coverage for your address and to set up a free estimate.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denver
We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed Saturday. Repair calls are often handled same-day, while installation is scheduled.
It depends on the gate’s height, location, and whether it’s electric, so check with the city’s building department before you build. For HOA properties, review the association’s rules on style and placement first. We can talk through what your project involves.
Yes. We handle residential and commercial gate types under one service model, from a single driveway gate to an HOA entrance or a commercial access gate. Call (866) 361-9624 for a free estimate on your property.
Ready to fix or install your gate? Call (866) 361-9624 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts. Whether your operator is a Mighty Mule, an Elite, or something else, we’ll tell you what’s wrong and which fix actually makes sense.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Denver Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Ernesto Salazar"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Bryce Parker"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jodi Barrett